
재료 수집: 타일 절단기, 교체용 타일, 그라우트, 다리미, 타일 접착제, 퍼티 나이프, 미네랄 스피릿, 헝겊, 스폰지, 롤링 핀.
타일 접착제의 작은 통만 있으면 됩니다.

타일 커터를 사용하여 타일과 그라우트 사이를 자릅니다.
주택 개조 또는 도구 대여점에서 특수 타일 절단기를 구입하십시오.

뜨거운 다리미로 타일을 따뜻하게하십시오.
따뜻한 다리미로 타일을 가열하면 타일을 고정하고 있는 접착제가 느슨해집니다.
뜨거운 다리미로 타일을 따뜻하게하십시오.
따뜻한 다리미로 타일을 가열하면 타일을 고정하고 있는 접착제가 느슨해집니다.

퍼티 나이프로 느슨한 타일을 들어 올립니다.
느슨한 타일을 퍼티 나이프로 조심스럽게 들어올려 네 면의 중앙에서 가장자리까지 작업합니다. 타일을 옆으로 치워둡니다.

바닥에 접착제를 녹입니다.
A rag dampened with mineral spirits works great to dissolve the adhesive.

Scrape away the old adhesive.
Use your putty knife to scrape away the dissolved adhesive goo.
Make sure your scraper doesn’t slip and damage surrounding tiles. If you encounter a stubborn spot, use the iron again to warm the adhesive, then scrape it out.
Scrape away the old adhesive.
Use your putty knife to scrape away the dissolved adhesive goo.
Make sure your scraper doesn’t slip and damage surrounding tiles. If you encounter a stubborn spot, use the iron again to warm the adhesive, then scrape it out.

Apply adhesive to the new tile and to the floor.
Coat the empty patch of floor with adhesive.

Put the new tile in place.
You should have enough give to be sure get the tile positioned just right.

1
Roll the tile with the rolling pin.
Pressing hard with the rolling pin will get rid of any trapped air pockets that will cause the tile to lift up.
1
Roll the tile with the rolling pin.
Pressing hard with the rolling pin will get rid of any trapped air pockets that will cause the tile to lift up.

1
Clean up excess adhesive.
A rag dampened with mineral spirits will clean up any adhesive around the edges of the tile.

1
Grout the new tile.
Apply the grout thickly and be sure to get it securely into the gaps.

1
Clean up excess grout.
Use a damp sponge to wipe away the extra grout. If any grout has to be replaced, mix it to match the color of the rest of the grout.
1
Clean up excess grout.
Use a damp sponge to wipe away the extra grout. If any grout has to be replaced, mix it to match the color of the rest of the grout.

1
Weigh down the tile with books.
Keep the books on for a day or two until you’re certain the bond can’t be broken.